1. Introduction to the working part: This equipment system is mainly composed of 2 sets of XYZ mechanism, 1 set of CCD positioning point solder paste system, 1 set of CCD positioning welding system and a feeding line. Mainly complete the functions of product feeding, CCD positioning, spot solder paste, soldering, and product discharging.
2. Introduction of the solder paste part: The solder paste part uses the XYZ three-axis gantry structure to drive the dispensing syringe and the CCD positioning part to perform solder paste work. The XYZ axis movement stroke is 300 * 300 * 100mm, and the repeated positioning accuracy of each movement module is ± 0.02mm.
3. Welding part introduction: Welding part adopts XYZ three-axis gantry structure to drive laser welding components for welding movement. The XYZ axis movement stroke is 300 * 300 * 100mm, and each movement module repeats positioning accuracy ± 0.02mm.
4.Introduction of the assembly line: The assembly line consists of a feeding station, a solder paste station, a welding station and a conveyor belt. The feeding station is mainly composed of a jacking cylinder, which is in an extended state when feeding. The work station and welding station are composed of induction switches, blocking cylinders, pressure plates and jacking cylinders. Manual loading will place the welding product carrier on the jacking cylinders at the feeding station. The subsequent stations give a signal and the jacking cylinders descend. After the carrier moves with the conveyor belt and triggers the solder paste position sensor switch, the cylinder is prevented from extending and the carrier is blocked. The solder paste station lifts the cylinder up to lift the carrier to perform solder paste action while blocking the cylinder from returning. After shrinking and soldering, the cylinder is lifted to move downward, and the carrier moves to the welding station for welding with the conveyor.
|Machine power consumption||2KW|
|operating system||WIN 7|
|control method||computer control|
|Features||Automatic spot laser welding dual-track feeding system|
|Air source||0.5 ~ 0.7MPa (dry and clean air pressure)|
|Power supply|| AC220V 50 / 60Hz, fluctuation <± 4% |
Maximum current <10A
Reliable protective ground wire (anti-static)
|Working environment requirements|| Ambient temperature: 24 ± 3 ℃ (requires installation of air conditioner) |
Ambient humidity: ﹤ 60%
Vibration: Foundation amplitude: <4um
Vibration acceleration: <0.04G
|Prohibited environment|| Corrosive environment. |
High frequency noise environment.
In a humid environment.
|Overall size||1300 * 1000 * 1750mm (L * W * H)|
1. Wuhan Boliante Laser is responsible for free installation, commissioning and training of technical staff for the equipment purchased by customers.
2. Wuhan Bolian Special Laser's service network spreads all over the country. Any customer's problems will be responded within 8 hours and resolved within 24 hours.
3. Wuhan Boliante Laser provides one year free warranty and lifetime warranty service to provide customers with first-class products, first-class quality and first-class service.
Customer Service Hotline, Tel: 027-88188521, Email: firstname.lastname@example.org, Fax: 027-59712183