⎝⎛龙博线上娱乐⎞⎠

Welcome to the official website of Wuhan Boliante Technology Co., Ltd.!

027-88188521

Chinese

English

How to perform a fast quality inspection on a laser welding machine?
发布时间:2017-11-30 13:17:57浏览次数: Article source : Editor's release time : 2017-11-30 13: 17: 57Views

激光焊接机在加工的时候有些问题,先去找材料,可能是材料有问题才导致的设备出现加工不良的情况,通过检查材料后进行更换,或者可以改变设备的机波形的设定来进行解决。 In general, if we find that the laser welding machine has some problems during processing, go to find the material first, the equipment may be defective due to the problem of the material. After inspecting the material, replace it or change the machine Set the waveform. Then if it is found that the problem of poor welding continuously occurs in the same part when welding the workpiece, it may be a problem with the workbench and the fixture, and the cause must be carefully investigated. Or when the situation of welding or welding through is found, we need to check whether the energy of the welding machine is stable or whether there is any problem with the fixture table and work table.

tag:

THE APPLICATION CASE

Related application cases

Technical topics
Apply for Friendship Link Entrance +
contact us
Wenyuan Building 2-03, Optics Valley Core Center, No. 303 Optics Valley Avenue, East Lake New Technology Development Zone, Wuhan.
Record number: Hubei ICP No. 17028127 Copyright Wuhan Boliante Technology Co., Ltd.

Hubei Public Security No. 42018502001428

七乐彩 欢乐拼三张 真人游戏平台注册 欢乐拼三张